Journal Articles - 8 |
2020 |
| Wang, Y., Zhang, Y., Qiao, Z., & Wang, W. (2020). A 3D Printed Jet Mixer for Centrifugal Microfluidic Platforms. Micromachines, 11(7), 695. | |
| Zhang, Y., Xiang, J., Wang, Y., Qiao, Z., & Wang, W. (2020). A novel gravity valve and its application in a 3D printed centrifugal fluidic-system for solid phase extraction (SPE). Microfluidics, BioMEMS, and Medical Microsystems XVIII, 19. | |
2019 |
| Zhang, Y., Xiang, J., Wang, Y., Qiao, Z., & Wang, W. (2019). A 3D printed centrifugal microfluidic platform for solid-phase-extraction and fluorescent detection of spilled oil in water. Microfluidics, BioMEMS, and Medical Microsystems XVII, 47. | |
| Zhang, Y., Xiang, J., Wang, Y., Qiao, Z., & Wang, W. (2019). A 3D printed centrifugal microfluidic platform for spilled oil enrichment and detection based on solid phase extraction (SPE). Sensors and Actuators B: Chemical, 296, 126603. | |
2013 |
| Cai, Z., Qiu, W., Shao, G., & Wang, W. (2013). A new fabrication method for all-PDMS waveguides. Sensors and Actuators A: Physical, 204, 44-47. | |
| Dai, X., Miao, X., Shao, G., & Wang, W. (2013). A novel fast and low cost replication technology for high-aspect-ratio magnetic microstructures. Microsystem Technologies, 19(3), 403-407. | |
| Shao, G., Cai, Z., Miao, Z., & Wang, W. (2013). In-situ fabrication of an out-of-plane microlens with pre-definable focal length. Microsystem Technologies, 19(11), 1823-1828. | |
2012 |
| Shao, G., Wu, J., Cai, Z., & Wang, W. (2012). Fabrication of elastomeric high-aspect-ratio microstructures using polydimethylsiloxane (PDMS) double casting technique. Sensors and Actuators A: Physical, 178, 230-236. | |
Conference Presentations - 5 |
2020 |
| D'Sa, E. L., B.; Zhang, Y. W., & W (2020). Fluorescence spectroscopy of oil-impacted waters in Gulf of Mexico: Enhancing detection with a microfluidic platform using solid phase extraction. In Gulf of Mexico Oil Spill & Ecosystem Science Conference 2020 | |
| Zhang, Y. X., J.; Wang, Y. Q., & Z.; Wang, W. (2020). A novel gravity valve and its application in a 3D printed centrifugal fluidic-system for solid phase extraction (SPE). In SPIE Photonics West 2020 - Microfluidics, BioMEMS, and Medical Microsystems XVII | |
2019 |
| Zhang, Y. X., J.; Wang, Y. Q., & Z.; Wang, W. (2019). A centrifugal microfluidic-cartridge for solid-phase extraction (SPE) enrichment and detection of PAHs in water. In 7th Annual Conference of AnalytiX-2019 (AnalytiX-2019) | |
| Zhang, Y. X., J.; Wang, Y. Q., & Z.; Wang, W. (2019). A 3D printed centrifugal microfluidic platform for solid-phase-extraction and fluorescent detection of spilled oil in water. In SPIE Photonics West 2019 Microfluidics, BioMEMS, and Medical Microsystems XVII | |
2018 |
| Wang, W. (2018). Mechanically Valved Centrifugal Microfluidic Technology and The Applications. In International Microfluidics Congress (2018) | |
